Your Marine Hot Water Heaters Specialists Help You Take Good Care of Your Outboards
Raritan Engineering Company your marine hot water heatersÂ analysts would like to share with you these topics we thought would be of interest to you this month regarding outboard motor painting tips.
Today, your marine hot water heaters experts know that many outboard motors are available in colors to complement the shade of your boat. Honda, Mercury and Suzuki, for example, all offer their outboards in at least two colors; Evinrude lets you add custom side plates and accents from a wide spectrum of color choices.
There are also companies that paint motors. The Miami-based Outboard Paint Shop, for instance, will paint an outboard in the 250 to 400 hp range for $1,200.
Yet there is a more economical, DIY option. The proprietary Quantum paint system from Engineered Marine Coatings (EMC2) utilizes a hybrid acrylic- polyester topcoat – a technology developed for the aerospace industry – to create an extremely durable and professional-looking finish.
Disassemble and Wash
Remove the cowl, the shroud from the midsection, and any plastic pieces or appliques that might interfere with the painting process. Remove the rubber seal around the bottom of the cowl and any other rubber grommets or gaskets that might interfere with painting exterior surfaces.Â
2. Prep and Mask
Sand all surfaces to be painted with 350- to 400-grit sandpaper. Use a power sander on broad surfaces, but you might need to hand-sand hard-to-reach spots such as around the bracket and lower unit.Â
3. Paint the Parts
Choose a windless day with low humidity and temperatures around 72 degrees. Protect the uncured finish from evening dew by starting early in the day or working in a covered area. Spray the dry surfaces with a medium coat of the Quantum 45-X-115 K adhesion promoter and let dry for five minutes.Â
4. Reassemble and Debug
Allow the final coat to dry for 24 hours. Then remove all masking materials. Carefully reattach and reassemble all parts. If a bug or debris marred the finish while painting, wet-sand the spot with 1,500- to 2,000-grit wet sandpaper untilÂ the blemish is eliminated and the desired smoothness is achieved.Â
How Many Cans?
Each Quantum 2K kit can be custom packed based on your motor size. It includes Quantum SR-002 Surface Prep/Clean, Quantum Adhesion Promoter, Quantum 2KA spray cans, rags, gloves, Scotch pad, tape and draping.Â
Your Marine Hot Water Heaters Professionals Equip You With the Skills You Need
You can find more information as well as get assistance on marine ice makersÂ at Raritan Engineering.
Painting Outboard Parts
First off, your marine ice makers know that it is best that you do not plan any outings for at least 2 weeks when undertaking this task. Initially, it will take some time, especially if you are going to try to repaint parts on the powerhead.Â
Keep in mind â Aerosol paint jobs are no where near as durable as a paint job done with quality paint from a gravity fed spray gun.
With Aerosol Can Paint
Here are the steps.
Items you need:
- Quality primer (self etching), paint, and clear coat.
- clear workspace
- wet sandpaper â 400, 800, 1000 â 2000 (available at automotive shops)
- Quality Rubbing / Polishing compound (3M Perfect-it II) removes fines scratches
- Plenty of time and patience.
Try to use a sanding block on flat surfaces and keep the pressure even. For other areas, you can obtain paint remover from local shops but it takes time to remove. It works great for those recessed areas, but it is messy and toxic.
Raritan Engineering Company has more information on marine hot water heaters, marine ice makers, and anyÂ marine sanitation device.
The post Marine Hot Water Heaters Experts Share Outboard Motor Painting Tips appeared first on .