Your Macerator Pump Specialists Give the Instructions Needed to Bleed Your Hydraulic Steering Properly
Raritan Engineering yourmacerator pump
distributors would like to share with you these topics we thought would be of interest to you this month regarding performance enhancing tips for your outboard engine.
Your macerator pump suppliers talk about how steering is arguably the most important system with respect to safe boating. When your hydraulic steering gets spongy, sloppy or otherwise unresponsive, it’s time to check everything for leaks, correct the problem, and then purge the system of air.
For a single-station, one-cylinder rig, start by screwing the filler kit onto a bottle of SeaStar hydraulic-steering fluid. Next, unscrew the vent plug at the helm and insert the hose from the filler kit. Invert and suspend the steering-fluid bottle in whatever way you can.
Allow the hose to fill entirely with fluid while you put clear plastic tubes onto the bleeder valves and run them into a container to collect the excess hydraulicfluid.
The fluid will get low in the supply bottle as you purge, so you need to fill it again with either new fluid or the collected fluid from the bleed valves. Do not let the fluid get below the filler tube, or you will have to start over because air will be reintroduced to thesystem.
Have an assistant turn the wheel clockwise until the cylinder is fully extended. Open the right-side bleeder. Hold the cylinder in place with your hand while your assistant turns the wheel counterclockwise.
Stop turning the wheel counterclockwise. Open the left-side bleeder. Turn the wheel clockwise while you hold the cylinder in place with your hand.